Class 4 medical laser — high-power photobiomodulation therapy

Therapy at the speed of light.

OptonPro delivers up to 25 W across three simultaneous wavelengths (810 / 980 / 1064 nm) for biostimulation, analgesic, and regenerative effects — with real-time skin temperature monitoring built into the applicator.

Manufactured by Zimmer MedizinSysteme, Germany.

SKU MEDI-4684-X01 · Available in 10W / 15W / 25W · Sold to health professionals & multidisciplinary clinics only
Zimmer OptonPro 25W Class 4 laser on stand
3 WAVELENGTHS810 · 980 · 1064 NM
25 W max
Emitted output
3 wavelengths
Simultaneous emission
IV class
Medical laser
Ø0.4″ min
Treatment area
8.4 lb
Unit weight
Skin temperature monitored in the applicator    Integrated VAS pain tracking, saved to patient file    Therapy Assistant recommends parameters    100–240V~ 50/60Hz    Available in 10W / 15W / 25W    Skin temperature monitored in the applicator    Integrated VAS pain tracking, saved to patient file    Therapy Assistant recommends parameters    100–240V~ 50/60Hz    Available in 10W / 15W / 25W   

Five documented effects, one wavelength set.

01 · Cellular

Biostimulation

Laser energy converts to chemical reaction energy, increasing activity in the cellular respiratory chain.

02 · Thermal

Thermal effects

Therapeutic heat in the tissue up to approx. 43°C, driven by tissue thermal conductivity.

03 · Pain

Analgesic effects

Mild thermal stimulus triggers gate-control pain inhibition; strong stimuli engage the endorphinergic system.

04 · Reflexive

Reflexive effects

Segmental reflexes activated by laser light relax muscle tissue and inhibit pain.

05 · Healing

Regenerative effects

Non-thermal fibroblast activation accelerates healing, using only small amounts of laser energy.

Three wavelengths, delivered together.

Most laser units fix a single wavelength, limiting the practitioner to one depth of effect per session. OptonPro emits 810 nm, 980 nm, and 1064 nm simultaneously, opening a broad field of therapeutic options in a single application rather than a sequence of them.

Higher power also means more power density in the tissue — so the applicator can work at a greater distance from the skin, enlarging the therapeutic radius and saving time per session, without sacrificing the thermal effect at depth.

Skin temperature is monitored via a sensor integrated into the laser applicator, so undesirably high skin temperatures are avoided regardless of skin type.
WavelengthTypical role
810 nmSuperficial tissue, analgesic-weighted effect
980 nmMid-depth penetration, vascular response
1064 nmDeeper tissue, tendons & joint capsules
SimultaneousCombined biostimulation and thermal effect

A built-in Therapy Assistant, guided by evidence.

Rather than starting from a blank parameter screen, OptonPro recommends a starting point — then tracks whether it worked.

  • Recommended parameters generated automatically from the treatment area, pain condition, and skin type
  • Integrated Visual Analog Scale (VAS) tracks patient pain perception before and after each session, saved to the patient file
  • Two interchangeable spacers hold the applicator at defined, repeatable distances from the skin
Zimmer OptonPro laser applicator in use on the knee

How an OptonPro acquisition works.

01

Consultation

We confirm your clinic type and caseload, and which power output — 10W, 15W, or 25W — fits your treatment mix.

02

Configuration

Applicator, spacers, and stand configuration matched to your treatment rooms.

03

Quote & financing

A written quote with 0% financing options, plus your price-match request if applicable.

04

Delivery & onboarding

Delivery coordination, setup, and a staff walkthrough on wavelength selection and VAS tracking.

Maximum operating convenience.

Applicator

One-handed laser applicator

Laser light is emitted from an ergonomically shaped applicator with a manually adjustable switch — double-click once for continuous emission, with no further action needed from the user.

Zimmer OptonPro laser applicator held in hand
Safety

Real-time skin temperature monitoring

A sensor built into the laser applicator monitors skin temperature throughout therapy, so undesirably high temperatures are avoided — whatever the patient's skin type.

Zimmer OptonPro laser applicator in use on the back
Interface

Fast access to therapy screens, VAS & history

A large, colourful display gives quick, direct access to the therapy screen — click a body part on the interface for therapy recommendations, without digging through menus.

Zimmer OptonPro full unit on stand with display

OptonPro, in the treatment room.

Device demo

High-power laser therapy, treatment demo

In session

Treating epicondylitis with OptonPro

The spec plate.

Optical
Laser diodes810 nm / 980 nm / 1064 nm
Emitted output, max.25 W (10W and 15W variants also available)
Treatment areaMin. Ø 0.4"
Laser class4 — observe special regulations
Electrical
Power consumption1.8 A
Operating voltage100–240V~, 50Hz / 60Hz
Protection classII
Applied partType B, per EN 60601-1
Dimensions & weight
Dimensions11.8"H × 13.8"W × 7.9"L
Weight8.4 lb
Built-in tools
Therapy AssistantAuto-recommends parameters by area, condition & skin type
VAS trackingPain scale recorded pre/post session, saved to patient file
SKU MEDI-4684-X01. Manufactured by Zimmer MedizinSysteme, Germany. Specifications shown for the 25W configuration.
Zimmer OptonPro laser therapy unit on stand, full view

One supplier for the whole build.

One supplier

OptonPro alongside treatment tables, shockwave, ultrasound, and daily clinic consumables — one order, one delivery schedule.

Configuration guidance

We help size the 10W, 15W, or 25W output to your caseload before you commit.

Price match, plus 5%

Bring a competing quote and we'll match it, then take an extra 5% off the difference.

Ongoing support

Applicators, servicing questions, and protocol advice don't stop at delivery.

Canada's all-in-one wellness & healthcare supplier.

Clinic setups, physiotherapy equipment, rehabilitation devices, and healthcare products, backed by a team that works with WSIB, ODSP, and private insurance plans — serving more than 2,000 clinics and patients across Canada and the U.S.

🔒

SSL secure checkout

Encrypted at every step

Verified storefront

Google-reviewed retailer

10+

Years in business

Serving Canadian clinics

🚚

Free delivery

On orders over $100

2K+

Clinics served

Across Canada & the U.S.

Practitioner accounts

Register for trade pricing

Insurance partners we work with.

Manulife
Sun Life
Green Shield Canada
Canada Life
Blue Cross Veterans Affairs Canada
WSIB

Brands we deal with.

Biofreeze
PINO
Sporlastic
Compex
Motion Medicine
Ofa Bamberg

0% financing for up to 52 weeks.

Instant approval on qualifying applications, for terms of 26 or 52 weeks depending on the device. Available to professional customers, subject to pre-approval.

Price match
+5% of difference
Financing term
Up to 52 weeks
Approval
Instant, pre-approval based
Eligibility
Professional customers

Bring Class 4 laser therapy into your practice.

Complete the form and a specialist will follow up with pricing, financing options, and answers on power output or installation. Every enquiry is reviewed to confirm professional eligibility before a quote is issued.

Head office2120 Matheson Blvd E, Mississauga, ON L4W 5E1
Response timeWithin one business day

Interested in purchasing the product?

Send us your details and our customer service team will contact you in 24 hours.
Our team will contact you within 24 hours after your submission. By signing up, you agree to receive marketing messages at the phone number or email provided. Msg and data rates may apply. View our privacy policy and terms of service for more info.
OptonPro Class 4 Laser
Request pricing today
Enquire